ADS-1 Auto Adhesive hopper feeder
The ADS1DynaFill™ automatically replenishes adhesive to the desired level in hot melt equipment. A low level indicator sends a signal to the DynaFill™ that adhesive is needed. The DynaFill™ then activates a positive pressure suction that draws the adhesive and deposits it into the hot melt unit. The ADS1 will easily integrate with competitive equipment configurations. Out of the box installation with drop-in adhesive tank connection.

 

Used parts & equipment


Graco Therm-O-Flo 5 heated pail unloader

65:1 Ratio, quiet king air motor

Heated CM800 pump

Finned follower plate

4 heated zones (Plate, Pump, hose & Gun)

Condition = 8/10

 

COST:      $14,500.00

Availability:      In stock


2 - Nordson 506 heated Pail unloaders

Gear pump

Smooth bottom follower plate (PUR)

Both work one requires pump shaft seal

Condition = 6/10

 

Cost:      $10,000.00 For both

Availability:      In stock


ITW Dynatec Dynamini adhesive supply unit

10lb adhesive hopper

18lb/hr melt rate

3.2cc single gear pump

240v, 1ph

Condition = 6/10

 

Cost:      $1,575.00

Availability:      In stock


Coming soon:

Used Graco, TOF 55 condition = 8/10

 


Misc. New & Used parts for sale

Hoses

#C34093U, #10 x 10ft, 120v High pressure: $860.00

#C34102U, #10 x 15ft, 120v High pressure: $1,200.00

#C34119, #10 x 25ft, 120v High pressure: $1,500.00

#GR06152HP, #06 x 15ft, 240v High pressure: $900.00

#GR06252HP, #06 x 25ft, 240v High pressure: $1,200.00

 

Dispense valves & regulators

#C34068.R1, Graco automatic dispense valve 120v: $1,200.00

#C34079.R2, Graco automatic dispense valve 120v: $1,430.00

#244910, Graco, ambient, Endure dispense valve: $500.00 

#243700. Graco heated fluid regulator, 240v: $1,435.00

   
hma systems - 185 Advance Boulevard, Unit 12, Brampton, Ontario, Canada  L6T 4Y3  
Tel: 905-458-8182  Fax: 905-458-0758